I bought the canon pixma mg3022 series from walmart and I have my phone connected now I am trying to connect my pc window 10 so I can have it wireless connection for printing and coping important files.
↧
I have a canon pixma mg3022 and need the security key to apply the wireless connection.
↧
MG3600 always creates a subnet
I have a MG3600 which I'm trying to configure & it repeatedly creates it's own subnet rather than connecting to the existing wireless network. Not what I was expecting.
It occurs to me that I don't see anywhere in the documentation that there is even a capabilty to provide authentication for the existing network. Being able to seamlessly print from only my phone is not the outcome that I was expecting.
Did I buy the wrong device? Should I be fighting with CUPS instead?
↧
↧
Canon PIXMA MG3620 Won't connect Wirelessly to PC
OS: Windows 10
Wireless internet
Canon PIXMA MG3620
I only purchased it as a scanner, and do not have it set up to print. It's been working for a few months, but sometimes it stops connecting to the wireless for no reason. Usually rebooting my PC, or the scanner will fix this.
This time it won't and I don't know what to do.
I've rebooted my computer and tried multiple times to pair my scanner with the wireless, but it doesn't seem to be properly connecting to my PC.
I get the error "Cannot communicate with scanner for these reasons:
-scanner is turned off.
-If using LAN connection, it is disconnected from LAN
(etc, etc)
Code:5,157,69
On the top of the scanner the Power button is lit (green), the wifi button is lit (blue) and the 8.5"x11" plain paper button is lit (green).
What do I need to do to get the scanner and computer connected again?
↧
How to setup a M2922 Pixma printer up to a HP Chromebook?
↧
Cannot setup wireless LAN on PIXMA MX922
I just bought the PIXMA MX922 and I can't complete the WLAN setup. Undert the Standard setup, when the printer searches for the wireless access point, I get the error message: "Access point was not detected." I then go into the LAN settings to check the WLAN settings, I see the Connection is Inactive. I've tried everything to make it Active but haven't had any success. Very frustrating that I can't use my new printer.
↧
↧
Pixma MX920 won't connect after upgrading router
I am running Windows 10, and I never had a problem printing wirelessly in the over 1 year I have owned this printer. I upgraded my router last week, and now that it's the 1st of the month (and 1st of the year) I have many things to print - and I can't get the printer to be recognized. I don't have the original CD (it's been a while!) and I downloaded the latest drivers.
I have turned off and turned on the printer and router many times, input my (way too long) router password - but nothing...I get to the point where it says "access point" found one or twice...then nothing. Still can't print. ARRRGH! Ready to toss it out the window.
↧
My laptop can't detect pixma mg 5720 even though the printer says it's connected to the network
My Canon Pixma MG6300 inexpicably stopped communicating with my laptop. I reset the wireless connection; still no communication (my phone has no problem with the network).
I got a Pixma MG5720 and tried to set it up today: same problem! The printer says it's connected to the network, but the computer can't "detect" it.
I ran setup both using the cd-rom and manually, repeatedly. No luck.
↧
Wireless printer setup witihout usb cable
Hello,
I am trying to install the wireless capacity for my mp495 printer onto my laptop. I currently use a Cox router, (for which I cannot find the wps button or maintenance button).
If I cannot find the wps button on my router, then do i have to use the WCN Method (using a usb flash/thumb drive) in order to connect my laptop to my printer wirelessly WITHOUT using the usb cable that would usually connect my laptop to my printer?
How would I do that if I have Windows XP, not Windows 7 or Windows Vista????
↧
"another computer is using this printer" I am using an MX490 series canon HELP!
↧
↧
Canon MX870 to new Netgear R7900
Just installed a new Netgear X6 R7900 and attempting to connect my printers to the router. The HP works fine but the Canon Pixma MX870 shows as being connected (192.168.1.5) however the red light is on for the Port on the router and it will neither print nor scan. If I connect wirelessly, it does work. I have switched ports on the router and even a new ethernet cable and neither works. Anyone had this issue and how did you solve it. Many thanks.
↧
Printer Not Responding error when trying to print on my Pixma MX922
I was just using my printer last night without an issue and this morning I'm having a problem every time I try and print. I checked the network connection and it appears to still be connected via WiFi. My internet did bounce for about 5 minutes and I'm assuming that caused it to disconnect, but when that's happened before the Printer has always connected back and worked fine. Today, I can't print anything and I work from home so it's a big problem.
What can I do to fix this?
↧
Set up MX450 for wireless access
I hope this doesn't get too complicated;
I had a network set up with a Verizon DSL connect to a local home network. I could never get the MX450 to be reognized , or connect to this network.
I have since been upgraded to Verizon FIOS , have a new Fios G1100 router. I retried setup to wireless connection, and now I CAN see the printer on both network computers, however, I was unable to print from the wireless connected printer.
Here is the present setup:
HP Pavillion Desktop running Win 10 connects via Ethernet ( or I could connect WiFi if desired)
SonyVAIO laptop running VISTA/SP2 connects via WiFi
Both computers see the printer on Net Work and/or Ntwk and Sharing screen.
I set this new configuration before I saw that some new drivers were available for both the VISTA and WIN 10 OS's.
I also noticed that I now have to listings for tje printer MX450 series printer and MX450 series printer WS both having same properties.
My questions are:
Should I download and install the new drivers?
Do I install drivers on each computer per OS?
Do I have to load all new drivers on both computers?
Should printer be On or Off when installing new drivers?
Whch printer name do I use and set as default (MX450 or MX450 WS)?
↧
MG2950 wireless connection
I have the Canon MG2950. I had connected wireless on my old router. But now I have a new router and I do not know what do I have to do in order to install again the wireless connection. Thank you in advance.
↧
↧
Canon MG5753. Printer is not visible on list when performing setup on the PC
Hello I just bought a Canon MG5753. I connected it successfully to the wireless router to which my PC is also connected.
But when performing the setup of the printer on my PC with the setup disk the printer is not visible on the list.
Would anyone know what the cause could be ?
Tx
↧
I have the pixma mg7720, can't figure out how to hook it up to wif, please help.
↧
Printer, Wifi, New Modem, wont work
I have a PIMA MX922 printer. I just updated my modem and router and now I cant print via wifi on amy of my decices
↧
Cannot print screenshot from my android phone on PIXMA IP8720 NO DISPLAYABLE IMAGES ERROR
This is the scenario: I take a photo with my S7 Edge. Then I zoom in on that photo and take a screenshot. When I try to print the screenshot I get the following message:
"no displayable images error. cannot display. there are no images in supported data formats."
The actual picture prints fine but thescreenshot of the picture will not print.
Any assistance or guidance would be greatly appreciated.
↧
↧
Printer not connecting to phone
I have the Canon MG3520 and I tried connecting it to my phone and it won't connect to my phone at all. I tried adding the canon service app to see if it would work and nothing. What should I do? And how do I reset my printer?
↧
Wireless network doesn't recognize PIXMA mx870 in Win 10. Cant reinstall printer on network
I am at a loss. Took the latest update of WIN 10 then suddenly lost ability to print to PIXMA mx870 which I know is on the network...I can't even see it anymore to reinstall...
↧
wireless connection for MX922 running windows10
I'm having trouble setting up the wireless connection for MX922 running windows10
↧